Siemens FC2005 Programming Manual page 49

Address
LED Normal Off
LED Activation
Wire Style
Turn Off
Isolator Support
Input Closed
(input channel)
Normally Open
(input channel)
Monitoring
(input channel)
Sensoractivationdelay
(input channel)
Silenceable
(output channel)
Silenceable On
Waterflow
(output channel)
Normally Open
(output channel)
Signal Shape
(output channel)
Pulse Mode
(output channel)
Failsafe Position
(output channel)
HoldThroughReset
(output channel)
OP921 Name
(Only available for Name Addition
FC901)
Address
LED Normal Off
LED Activation
Audible Base Type
48|63
Programming Manual of FC2005/FC901
Range: 1...50; System assigns one address automatically once
a device is added.
Bool: True/ False (default)
Input Only (default)
Input or Output
Option 1: Class A
Option 2: Class B (default)
Bool: True/ False (default)
When set as True, the device should be wired according to the
rules for isolator supported. Otherwise, the panel reports
trouble. When set as False (default), the device should be wired
as polar non-sensitive. Otherwise, the panel reports trouble as
well.
Bool: True/ False (default)
Bool: True (default) / False
Option 1: Open Only (default)
Option 2: Open and short
Range: 0.25 s (default)...240 s (select one option from the list)
Bool: True/ False (default)
Available when "Silenceable" (output channel) is set as True.
Bool: True (default) / False
Bool: True (default) / False
Static (default)
Pulse
Available when "Signal Shape" (output channel) is set to "Pulse".
Range: 1...20 s
Select one option from the drop-down list.
Off (default)
Inactive
Active
Device won't be reset when press Reset button on the panel.
Bool: True / False (default)
Name of the device
Additional description of the device; max. 20 characters
Range: 1...50; System assigns one address automatically once
a device is added.
Bool: True/ False (default)
Input Only (default)
Input or Output
Unknown (default)
A6V10333724_b_en_--