Advertisement
Quick Links
STS-300
Acid Neutralizing Filter
Installation / Operation
Manual
BrassMaster and BrassMaster Plus Technical Video Library:
http://watercontrolinc.com/residential-technical-support/residential-technical-videos
BrassMaster technical videos demonstrate how to set up or remove the control module. If returning your
control module, please use the (downloadable)
Module Order
Form.
Advertisement
Related Manuals for Water Control Corporation BrassMaster
Summary of Contents for Water Control Corporation BrassMaster
- Page 1 Acid Neutralizing Filter Installation / Operation Manual BrassMaster and BrassMaster Plus Technical Video Library: http://watercontrolinc.com/residential-technical-support/residential-technical-videos BrassMaster technical videos demonstrate how to set up or remove the control module. If returning your control module, please use the (downloadable) Module Order Form.
-
Page 2: Installation Procedure
Installation Procedure 1. Identify installation location. Piping should originate shortly after incoming water supply shutoff such that all water flows through filter first. This system and installation must com- ply with state and local laws and regulations. 2. Connect water piping. This unit has been supplied with a manually operated bypass device which enables it to be isolated from the water service lines for maintenance and service, and also maintain the continuity of the water supply when the filter is disconnected. -
Page 3: Start-Up Procedure
Start-Up Procedure Placing unit into service Normal Operation Mode Icon While in service, the Data Display alternates between time of day, volume remaining or days to regeneration. The Flow Indicator flashes when outlet flow is detected. The Faucet Icon flashes if a regeneration cycle has been queued. Flush the filter with water: Locate the nearest cold water faucet tap and open it. - Page 4 Start-Up Procedure Setting current time of day Setting Current Time / Day 1. Press either the Up or Down buttons to adjust current time of day by one digit. Push and hold either up or down set button to adjust current time of day display by several digits. User programming User Programming Mode Options Abbreviation...
- Page 5 Start-Up Procedure User programming (cont’d) 3. Adjust Regeneration Time: Press the Extra Cycle button to advance to next option. This setting determines the time of day that the unit will enter the regeneration cycle. The most common / default setting is 12:30 AM. IMPORTANT: this regeneration time should be offset from any water softener’s regeneration time by at least 2 hours to insure adequate regenera- tion pressure.
- Page 6 Please contact your dealer or Water Control Corporation for module support. BrassMaster and BrassMaster Plus Technical Video Library: http://watercontrolinc.com/residential-technical-support/residential-technical-videos BrassMaster technical videos demonstrate how to set up or remove the control module. If returning your control module, please use the (downloadable) Module Order Form.
- Page 7 Limited Warranty Water Control Corporation warrants the control valve to be free of manufacturers defects for a period of 5 (five) years from the date of installation, and the fiberglass reinforced mineral tank, and plastic brine tank, to be free from leaking due to manufacturers defects for a period of 5 (five) years.
- Page 8 Water Control Corporation 7150 143 Ave NW ● Ramsey, MN 55303 Phone: 1-866-405-1268 ● Fax: 763-427-5665 www.watercontrolinc.com 0919...