Color Kinetics Data Enabler Pro Product Manual page 3

Key features
Take a closer look
Easy installation
Accessible, clearly labeled terminal block connectors
for DMX, Ethernet, line voltage, and luminaires make
installation easy. Tethered cover with captive screws
ensures convenient removal and replacement.
On-board diagnostics
On-board indicator LEDs provide visual feedback for
normal operation, Ethernet connection detection, and
Ethernet and DMX data transmission.
Outdoor-rated
Data Enabler Pro offers superior leakage protection in a
cast aluminium, IP66-rated enclosure.
Universal power input range
Data Enabler Pro automatically senses mains voltages
ranging from 100 to 277 VAC, and passes mains
voltages through to all connected lights.
Supports Powercore luminaires
Powercore our patented approach to power output
proves that simple is better. As well as faster, more
efficient, and accurate. Powercore controls power
output to luminaires directly from line voltage. It merges
line voltage with control data and delivers both over
a single standard cable—dramatically simplifying
installation and lowering total system cost.
Full support for DMX and Ethernet
Provides inputs and outputs for both DMX and
Ethernet, allowing you to connect multiple Data Enabler
Pro devices in series. Also provides an Ethernet output
terminal for iColor Accent MX Powercore gen2 support.
Multiple conduit entries
Data Enabler Pro conduit entries accommodate NPT
conduit in US trade sizes of 1/2 in and 3/4 in, or metric
sizes of PG13 and PG21.
Designed for maximum energy efficiency
Data Enabler Pro consumes just 20 W maximum.
Optional power-saving modes automatically cut power
to attached lights when lights are off for a configurable
number of minutes.
Data Enabler Pro Product Guide 3