⑭ エアダクト、 サポートバー、 PCIライザカードを取り付け、 トップカバー(前・後)を取り付けます。
Install Air duct, Support bar, PCI riser card and TOP cover.
・ケーブルを端によせてエアダクトを取り付けてください。
Attach the air duct the cable Preface to the end.
・
サポートバーを取り付けるときは、PCIe SSDケーブルをサポートバーの下に
通してから取り付けてください。
IMPORTANT
When installing the support bar, please attach it from through the PCIe SSD
cables under the support bar.
⑮ IDラベルを基本装置前面に貼り付けます。
スロットIDおよび搭載位置は次の図を参照してください。
Stick ID label on the front of the server.
Slot ID and mounting position, please refer to the following figure.
取り外した部品は、大切に保管してください。
Keep the removed part for future use.
Check
・スロット8 ~ 11は増設用PCIe SSDドライブ専用スロットになります。
Slots 8-11 will be expansion for PCIe SSD drive dedicated slot.
IMPORTANT
スロット8
スロット10
Slot 8
Slot 10
スロット9
Slot 9
搭載不可
Not installed
スロット11
Slot11
IDラベル貼付位置
Label pasting position
N8118-301
2.5型PCIe SSD搭載キット
取り扱いの手引き
2.5-inch PCIe SSD Installation Kit
User's Guide
*855-911174-301-01P*
*855-911174-301-01 *
855-911174-301-01-2