2St Type Of Label With Reset Button - CEZA FSECZ102A Quick Configuration Manual

2st Type of Label with reset button

Reset Button:
• Use a thin metal rod (Ø=1mm)
• Hold pressed the "Reset Button" for more than
10 seconds (Mother board will make a sound)
• Wait few seconds to finish reset procedure
Reset from the control panel:
• Go to the "Info Menù"
• Go to the "IP" or "IP Address" entry
• Hold pressed the "Menù Button" for more than
10 seconds (Mother board will make a sound)
• Wait few seconds to finish reset procedure
Automatic Reset with the router off isn't available.
With this Type of Label, is possible to
make an AP MODE reset with the
panel, or use reset button behind the
left hole in the label, as in the photo
22