Reset Of The Wifi Module; 1St Version Of Label Without Reset Button - CEZA FSECZ102A Quick Configuration Manual

Click on the My Stove Remote "Hamburger Menu"
Click on "
CHANGE STOVE
Click on "
ADD STOVE

Reset of the WiFi Module

If it is necessary to reset the wifi module, it is possible
to make it in different manners and it depends to the
"Type of Label":

1st Version of Label without Reset button

Reset from the control panel:
• Go to the "Info Menù"
• Go to the "IP" or "IP Address" entry
• Hold pressed the "Menù Button" for more than
10 seconds (Mother board will make a sound)
• Wait few seconds to finish reset procedure
Automatic Reset: (Only for this version)
• Switch off the router
• Connect the power supply to the stove
• Wait 20 minutes
"
"
With this Type of Label, it is possible
to make an AP MODE reset with the
"Panel" or "Automatic Reset" with
router off.
10