Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Goldair GCW300
Summary of Contents for Goldair GCW300
- Page 1 Operating Instructions 2000W CERAMIC WALL HEATER Model: GCW300...
- Page 2 General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 3 General Care and Safety Guide • Never use the appliance to dry clothes. • Always unplug appliance when not in use. • When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
- Page 4 General Care and Safety Guide • The appliance must not be immersed in any liquids. • There are no user serviceable parts installed in the unit. • Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
-
Page 5: Installing Your Appliance
Before using this appliance, it must be wall mounted. NOTE: Your Goldair Ceramic Wall Heater should be installed with at least 1.8m clearance from the floor at least 300mm clearance from the ceiling and 200mm clearance from any other surrounding parts including other appliances, side walls, shelves and soft furnishings. -
Page 6: Installation
Installing your Appliance Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. CAUTION: Do not mount directly under or over an electrical power socket. It is recommended to install the heater to the side of the power socket. -
Page 7: Operating Your Heater
Operating Your Heater WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front and sides of the appliance. WARNING: Do not use this heater with a programmer, separate timer, remote-control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly. -
Page 8: Heater Controls
Operating Your Heater HEATER CONTROLS Switch on the Power Button at the rear of the heater to turn the unit on. All functions are controlled from the remote control. For best results, aim the remote directly at the remote sensor on the front panel of the heater. The remote has a 3 metre range of operation. -
Page 9: Child Lock
Operating Your Heater THERMOSTAT To adjust temperature, press the ‘-’ or ‘+’ buttons to set the desired temperature from 10℃ to 49℃ When the temperature is 4 degrees or more below the set temperature, the heater will operate in the HIGH heat setting. When the temperature is within 2 degrees of the set temperature, the heater will reduce to the low heat setting. - Page 10 • Open the APP Store or Google Play on your mobile phone. • Open “Search” and enter “Goldair" • Click “GET” and begin to download and install. Once downloaded to your phone open the APP Tap REGISTER in the centre of the screen.
- Page 11 WiFi – Downloading and Setting up APP You can either register an email address or a phone number. The APP defaults to email but you just need to tap the “Register by Phone” at top right of the screen to change. Enter you email address or a phone number then press “Get authentication code”.
- Page 12 Pairing APP to Heater Enter the verification code that you will receive by email or text message Next you will be prompted to Set a Password. The password must contain 6 - 20 characters and must be a mix of letters and numbers. We recommend allowing the APP to access your location.
- Page 13 Pairing APP to Heater Turn the heater on using power switch on the back and setting the heater to ON with the remote control. On your phone tap the ‘+’ to connect to the heater. If the ‘WiFi’ symbol is not already flashing on the heater, press the small black button on the back of the heater for 5 seconds until the WiFi indicator light starts flashing.
- Page 14 Pairing APP to Heater Choose/confirm which WiFi to connect to. Note: your phone may pick up other WiFi signals (e.g. neighbours) so you will need to choose. Enter your WiFi password and press ‘Confirm’ The phone will then connect to the heater. Ensure you have a good strong signal from your WiFi router.
- Page 15 Open the “GOLDAIR" APP to select the heater (when using one mobile phone to control multiple heaters, you need to select the heater to be operated).
- Page 16 Operating your Heater from the APP You can adjust the heating levels, add a countdown timer and control some other settings from the LEVEL Mode can be set to Cool Wind, Level 1 (low) Heat, Level 2 (high) Heat or Automatic heating. Set your desired ‘Level’...
- Page 17 Operating your Heater from the APP SETTINGS From ‘Settings’ you can • turn off the heater display ‘Light’ • set the ‘Open Window’ function • set the louvre oscillation ‘Swing’ Tap the “Pen’ symbol on the top right of the control screen of the APP to take you to the next page.
-
Page 18: Care And Cleaning
Model No: GCW300 Supply: 220-240VAC 50/60Hz Wattage: 2000W SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm Phone +64 (0)9 917 4000 Phone +61 (0)3 9365 5100 Phone 0800 232 633 Phone 1300 465 324 info@cdb.co.nz... -
Page 19: Two Year Warranty
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. - Page 20 New Zealand PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz Australia PO Box 574, South Morang, Victoria, 3752 www.goldair.com.au...
Need help?
Do you have a question about the GCW300 and is the answer not in the manual?
Questions and answers