Page 2
8. The common cause of overheating is deposits of dust or fluff in the appliance. working properly, contact the place of purchase or the Goldair Customer Services Team. (refer Ensure these deposits are removed regularly to details on back page). Repair work on the...
Page 3
LOCATION 1. The appliance should be placed with a minimum distance of 90 cm away from flammable objects (e.g. curtains), walls or other structures! 2. Installation of the heater on the wall MUST BE 1.8m high from the floor and the heater location MUST NOT be directly below a main power socket.
INSTALLATION Drill two holes on the wall allowing 1.8meters above the floor and 20cm from side walls. Be sure to make the hole diameter is the same as the expanding screw pipe. Place the expanding screw pipe into the hole in the wall and then fix two screws on the expanding pipe, keep the tips of the screws out approx.
FAN MODE: Remote & Manual: 1) Press the On/Off button, the heater will switch on, the louver will open and the fan will blow. The LED screen will display the room temperature. 2) To switch the fan off, press the On/Off button another 4 times. HEATING MODE: Manual: 1) Press the On/Off button, the heater will switch on, the louver will open and the fan will blow.
Page 6
SPECIFICATIONS Model No GCW250 Voltage 220-240V AC Frequency 50Hz Output Power (W) 2000W max. IMPORTANT! ~ NEVER COVER THIS HEATER! SUPPORT AND TECHNICAL ADVICE North Shore City, Auckland, New Zealand Monday – Friday 8am-5pm Phone: 0800 232 633 Website: www.goldair.co.nz...
Page 7
Your Goldair product has been inspected and tested and is guaranteed subject to the following for a period to two years from the date of purchase against defects in workmanship and materials. During this period, such defects will be rectified by repair or replacement of the product purchased.
Need help?
Do you have a question about the GCW250 and is the answer not in the manual?
Questions and answers