Advertisement
SAFETY INSTRUCTIONS
Modifications in the interest of technical progress may be made by the manufacturer without prior
notice and may not be included in the operating instructions.
Check the device for completeness, tightness and function before commissioning.
Never put a defective or non-functional device into operation! Contact the manufacturer or have
the device checked by a qualified specialist.
Always work with care and the necessary caution!
Do not use excessive force under any circumstances!
Use safety equipment. Always wear protective goggles with side protection, ear protection, respi-
ratory protection and safety shoes!
Always work in well-lit locations.
Always make sure that no body parts or clothing can get into danger areas (e.g. the chisel, the
grinder, etc.) during the work process!
Ensure that the unit is stable and safe when in use.
Keep children or unauthorized third parties away from the device!
Avoid unintentional operation of the operating lever when the unit is not in use or when connecting
the compressed air hose.
Do not make any technical changes to the device, use only approved accessories.
Do not apply excessive pressure with the tool on the material to be machined, the recoil could lead
to injuries!
Never disconnect the compressed air hose from the unit while the control lever of the unit is en-
gaged!
Make sure that the torsion spring (if included) is always mounted on the device!
Never carry the unit by the compressed air hose.
Never exceed the permissible inlet pressure of 6.2 bar.
Use only compressed air as pressure source, never gases such as pure oxygen.
Disconnect the compressed air supply from the unit when it is not in operation.
Do not operate the machine if you are tired or under the influence of alcohol, drugs, medications,
or other intoxicating substances.
Store packaging parts (foils, plastic bags, polystyrene, etc.) only in places which are not accessi-
ble to children, especially infants! Since parts of packaging often present undetectable dangers
(e.g. danger of suffocation).
INTENDED USE
The compressed air unit set contains various compressed air operated units which are suitable for
certain tasks depending on the concept (see respective chapters).
The devices are not suitable for permanent operation.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 23
Advertisement
