Reece KADO Installation Instructions

Lussi led mirror 600 x 800

WARNING

This mirror must be installed by a qualified electrician in accordance with AS/NZS 3000 wiring rules. Switch off the electrical

supply at the mains before installation and maintenance. A means of disconnection must be incorporated in the fixed wiring

in accordance with the wiring rules. Suitable for bathroom and non-bathroom/dry areas. Not suitable for above baths, nor

for installation in saunas, steam rooms or shower cubicles. Please consult with a qualified electrician to confirm appropriate

compliant installation location.

Do not connect to a plug and socket outlet. Rated IP44 and suitable for indoor use only. Do not fix to damp or conductive

surfaces. Site well away from curtains and fabrics. Never cover the mirror. Switch off after use. Do not leave on for prolonged

periods. This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been given supervision or instruction. Children should be supervised to

ensure that they do not play with the appliance.

Inspect the product immediately upon receipt for transit damage, missing parts or manufacturing faults. Handle the product with

care and protect against knocks to all sides and edges of the glass.

Please ensure a copy of the installation

instructions is left with the end user for future reference

Kado Lussi LED Mirror 600 x 800

area is 270H x 440 mm

800

Touch Sensor

Table of Contents

Do you have a question about the KADO and is the answer not in the manual?

Page 1 Installation Instructions Kado Lussi LED Mirror 600 x 800 WARNING This mirror must be installed by a qualified electrician in accordance with AS/NZS 3000 wiring rules. Switch off the electrical supply at the mains before installation and maintenance. A means of disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
Page 2 Installation Instructions Kado Lussi LED Mirror 600 x 800 1. Place the included template to the back of the mirror to ensure the holes on the template match the mounting holes on the mirror. 2. Tape the supplied template to the wall taking in consideration the position of the mounting holes. With a spirit level, position template and mark each fixing point.