11
Attach the Rear Support & Side Supports
Rear Bottom View
x7
21
E
1. Fit the rear support (21) onto the vehicle. And keep the longer end of the rear
support fit into the groove inside the rear bumper.
2. Tighten seven Ø4x12 round head screws (E) to secure it with a screwdriver.
3. Fit the side support (7) onto the one side of the vehicle.
4. Tighten six Ø4x12 round head screws (E) to secure it with a screwdriver.
5. Repeat for the other side.
x6
E
7
7