Advertisement
Installation of EOG Unit (For Dealer Install Kits)
Step 1:
For both the Ozotech & Nelsen EOG Models: Unplug
the power supply for the control valve from the wall outlet.
Step 2:
Remove the cover from the control valve,
Photo A
Step 3:
For the Ozotech EOG Model,
previous page,
leave the power supply connected to the
control board,
Photo B.
Photo B
Reference 1 on
Move to Step 6
Step 4:
For the Nelsen EOG Model,
ous page,
disconnect the power supply from the control
board,
Photo C.
Photo A.
Photo C
Step 5:
Unsnap the top of the drive bracket using your
thumbs and forefingers to expose the backplate. Remove
the power supply by pulling it through the back of the
backplate,
Photo D.
Photo D
Forefingers
Here
-1-
Reference 2 on previ-
Thumbs Push Up on Tabs
AIO-OZONE Installation & Programming Guide
Hide quick links:
Advertisement
