Table of Contents
Advertisement
3. Hardware assembly
Before anything could be done with the device, it must be assembled into its designated
aluminium case. Tools needed for this are the Phillips screwdriver and Allen key which
comes packaged with the appliance. These should be enough to work with all the screws in
the appliance.
3.1
Case disassembly
Case disassembly is a pretty straightforward matter and can be described in several steps.
Figure 3.1: Case disassembly.
STEP 1. Remove the top cover first by unscrewing the four Allen head screws from the top
cover, and gently lift it up.
Advertisement
Table of Contents
