Supported Phones - Bicom Systems OfficeBox Gen. 3 Hardware Manual

2.4 Supported phones

The back plate will also have named cutouts for all the connectors that the motherboard
provides. From left to right, the connectors are:
C
ONSOLE
certified technician needs to debug it (for simplicity reasons, appliance does not have
any monitor connectors such as VGA, DVI or HDMI),
LAN - Standard ethernet port which is used as the main communication port for the
appliance.
MAN - Managed Area Network, ethernet port used for the manual connection to the
appliance which is needed to discover or setup the network details for the LAN port
(See Section 4.3).
RAN - Replication Area Network, dedicated ethernet port used for network replication
to a second appliance for backup purposes.
USB - two USB 3.0 ports for various needs.
P
OWER JACK
2.4 Supported phones
Depending on the edition of the appliance, number of supported phones will vary. If the
appliance is a business edition appliance, it will support all the models that are officialy
supported by PBXware. Please check out our wiki
1
http://wiki.bicomsystems.com/UADs
- COM port used as a serial connection to the appliance, just in case a
- 12VDC power connector.
1
page for a complete list.
15