Mitsubishi DA25W-H User Manual page 31

Touch Clothing Amount button
3 clothing amount could be selected.1.2.3.Different clothing amount correspond to
different dry clothes time accordingly. The digital tube will show the clothing amount
accordingly. (This function could be setted only under the dry clothes mode.).
5. Memory Function
After turning off the machine(don't unplug the power plug),when turn on the
machine again, it will memorize and run as the working mode before turn-off.Only
timer and lock function couldn't be memorized.
While if power cutoff suddenly or unplug the power plug when the machine is
running, when power is on again or plug in, the machine won't start to work
automatically. The user need touch the power on/off button again to open the
machine, and it will work at initial working mode.
6. Water Tank Full Auto-stop Function
When the sensor detected the water level reached the setted height, the buzzer will
alarm, the icon lighten, the machine will stop working and louver will close automatically.
The user need empty the watertank, carry the tank back into the machine, then the machine
will return back to work as the settings before watertank full. (The compressor won't start to
work until the time interval from water tank full to carry the tank back into the machine≥3
Minutes for compressor protection purpose.)
7. Auto Defrost
When the machine operates in the low temperature, the evaporator's surface might be
frosted. In order to make sure the machine operates normally, the machine has auto defrost
function. When the sensor detects the temperature of evaporator≤-1℃，the machine will
enter auto defrost function. That means the machine will run at continuously
to adjust the dry clothes working time. Total is
31