Led Light Globes; Power Supply - KMART Hollywood Mirror Manual

4.2 LED Light Globes

Remove the LED light globe from its box and insert into the light socket on the
mirror.
Rotate the LED light globe clockwise to screw the light in. Nip it up but do not
overtighten.
Repeat for all other LED light globes.
Please note there are two LED light globes supplied as spares.
5

Power Supply

Important: Only use with Power Supply Model: CW1203500AU
(Output: 12Vd.c. 3.5A)
Unravel the power supply cable.
Plug in the small plug on the end of the power supply cable into the power jack
located in the back of the mirror.
Plug the power supply into the power point and switch on.
Note: Switch off and remove the power supply from the power point when not
in use.
Page 8 of 12