Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for KMART Hollywood Mirror
- Page 1 For Household Use Only Model No.: DP317 Rev 1...
- Page 2 Page 2 of 12...
-
Page 3: Table Of Contents
Warnings .................. 4 Safety Directions ..............4 Components ................6 Assembly Method ..............7 4.1 Base ..................7 4.2 LED Light Globes..............8 Power Supply ................8 Using the Mirror Lights ............9 6.1 On / Off ..................9 6.2 Light Type ................9 User Maintenance .............. -
Page 4: Warnings
Warnings Before using this appliance, read and follow all warnings and instructions in this manual, even if you are familiar with this product. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Page 5 DO ensure the mirror is dry before adjusting the settings. DO use only on dry, level, indoor surfaces. DO use only as described in this manual. DO use only manufacturer's replacement LED light Globes. Contact Customer service for spare LED Light Globes. DO store your appliance indoors in a cool dry area.
-
Page 6: Components
Components 4 Long Screws for mirror to base stand Mirror assembly Power Supply On / Off Switch & Light Type Selector Base / Shelf Side Posts 4 Short Screws for Base assembly LED Lights (plus 2 spare LED globes) Note: The specifications and/or components of this appliance are subject to change without prior notice Page 6 of 12... -
Page 7: Assembly Method
Assembly Method 4.1 Base Please Note: a small amount of assembly is required and a Phillips Head screwdriver will be required. • Position the two side posts over the holes in the base and then from underneath, insert the Short screws and tighten with the screwdriver. Short Screws •... -
Page 8: Led Light Globes
4.2 LED Light Globes Remove the LED light globe from its box and insert into the light socket on the mirror. Rotate the LED light globe clockwise to screw the light in. Nip it up but do not overtighten. Repeat for all other LED light globes. Please note there are two LED light globes supplied as spares. -
Page 9: Using The Mirror Lights
Using the Mirror Lights 6.1 On / Off With the power supply plugged into the power point and switched on, and the power supply cable plugged into the back of the mirror, press the On / Off Switch button on the mirror front. 6.2 Light Type There are three types of light you can choose from being Cool, Warm and Natural. -
Page 10: User Maintenance
User Maintenance WARNING: Switch off and unplug the power supply before any maintenance or cleaning. 7.1 LED Light Replacement If you need to replace any of the LED lights, first switch off and unplug the power supply. Gently grasp the LED globe and rotate anticlockwise to unscrew the light. IMPORTANT: Do Not stick any foreign object or body part into the LED light socket as you may cause injury to your person or damage the product. -
Page 11: Warranty Against Defect
12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance... - Page 12 Page 12 of 12...