Advertisement
Available languages
Available languages
3. Fill the electric kettle (1)
up to the marking, which
shows the maximum fill
level, and close again the
previously opened lid (3).
4. Place the electric kettle
(1) again on the appliance
base (2).
5. Plug in the mains plug in
a well accessible socket,
the voltage of which
corresponds to the specifi-
cations on the data plate.
6. Heat the water by
activating the switch (4).
The indicator lamp of the
electric kettle continuously
glows during the process of
boiling. After the water has
been heated, the appli-
ance and the indicator
lamp automatically switch
off.
7. Pour out the water and
rinse the interior of the
electric kettle with fresh
water.
8. Once you have repeat-
ed this process, the appli-
ance is ready for use.
10. Cleaning
DANGER-
ELECTRIC SHOCK!
• Pull out the mains plug
from the socket before you
Bedienungsanleitung 74158_300719.indd 15
clean the electric kettle.
• The electric kettle, the
appliance base, the
connecting cable and the
mains plug are not allowed
to be immersed in the
water or other liquids.
WARNING-
RISK OF INJURY!
• The electric kettle
becomes very hot after
operating it. Let it cool
down before cleaning.
Cleaning:
1. Remove the mains plug from the
socket.
2. Clean the electric kettle with a dry
cloth. In case of severe staining, the
cloth can be slightly moistened.
3. In this case, dry off the electric
kettle thoroughly after cleaning.
4. We recommend the cleaning of
electric kettles after every use.
11. Storage
Keep the appliance in a clean, dirt
free and dry place.
12. Disposal
Dispose of the packaging after
sorting it correctly. Give the card-
board and carton for the waste
paper collection, foils for the collec-
EN
- 15
30.07.19 18:12
Advertisement
