Advertisement
Smart Wi-Fi Plug
Supported Load Types:
Coffee Maker: 800W
Desk Lamp: 235.2W
LCD: 270W
Heater: 1500W
Humidifier: 260W
Iron: 1500W
Toaster: 850W
Tower Fan: 50W
Troubleshooting
1. What devices can I control with the Smart Plug?
You can control lights, electronics and small appliances such as
humidifiers, air purifiers, portable heaters and fans.
2. What should I do when I can't control the connected device?
•
Check that the connected device is switched to ON.
•
Make sure your mobile device and the Smart Plug are on the
same Wi-Fi network.
•
Enable Remote Control to control the connected device from
outside your home.
3. What should I do when the Wi-Fi LED is lit red?
A red LED light indicates no network connection.
• Check your network connectivity.
• Relocate the Smart Plug. Avoid placing the Smart Plug near
potential sources of radio signal interference.
• Repeat the app onboarding process.
• Factory reset the Smart Plug and try to add it again.
4. How do I pair the Smart Plugs with Amazon Echo?
Visit www.tp-link.com/en/faq-944.html or within the Kasa Help
section for pairing instructions.
© 2017 TP-Link. All rights reserved.
Press and hold for 5 seconds or until the
Wi-Fi LED blinks amber and green to
initiate the app onboarding process.
Press and hold for 10 seconds or until the
Wi-Fi LED blinks amber rapidly to factory
reset.
Blinking amber and green:
process.
Blinking green:
Connecting to the network.
Green:
Network connection established.
Blinking amber:
Factory resetting.
Amber:
Rebooting.
Red:
No network connection.
Green:
The Smart Plug is switched on.
Off:
The Smart Plug is switched off.
USB Port (HS110 Only):
USB-powered electronic devices.
Maximum output current: 1000mA (1A).
App onboarding
Charge your
Advertisement
