Kit Application
The Permanent Display Installation Kit is designed
for tracks where permanent installation of the display
is required. Power and data connections are routed
to the scoreboard through 3/4" conduit attached to the
backside of the display. The kit provides connection to
a 110VAC or 230VAC source to power the scoreboard.
Mounting hardware attaches to the display and provides
weather protection for the electrical connections.
Kit Components
- Lower bracket with 3/4" conduit connectors
- Aluminum cover
- 110/230VAC Power Adapter brick
- Screws for attachment to enclosure
(#8-32 X 3/8").
Kit Installation
1. After mounting the display securely, attach
the Lower Bracket with conduit connectors using two
screws (#8-32 X 3/8")
2. Secure the AC Adapter to the velcro pad and
plug into the power plug on the display.
3. Bring in 110/230 VAC power through one of
the conduit connectors and splice to the appropriate
wires for the AC source.
4. Bring in the data cable through the other con-
duit connector and connect to the circuit board. Do not
route data cables in the same conduit as power cables.
(Wireless units will not have a data cable).
5. Install the Cover over the AC Adapter and
wires; secure with six screws (#8-32 X 3/8").
Permanent Display Installation Kit
Part # 6601A
RaceAmerica Model 6632E Display Timer
AC Power Adapter
Lower Bracket
Conduit Connectors
Screws
10