Panasonic Toughbook CF-50 Service Manual page 42

7. Remove the two screws <N>, and remove the LCD.
Screw <N> : DXHM0009XB
8. Remove the LCD signal cable from the LCD.
Hinge L
<O>
9. Remove the six screws <O>, and remove the LCD Plate
L/R.
Screw <o> : DXQT2+D25ZMT
14.12. Removing the 14" LCD
1. Disassemble the LCD in the same way as 15" LCD
(page38).
2. Remove the four screws <O>.
Screw <o> : DXQT2+D25ZMT
3. Remove the tape A/B.
4. Remove the two screws and Backlight Angle.
5. Draw the LCD Back light unit slowly from the LCD unit.
<O>
Backlight
Tape
Tape
LCD
Hinge R
Hinge L
LCD
Hinge R
<O>
Backlight unit
Backlight Angle
Screws
14.13. Removing the Top Cabinet
<E>
<E>
<E>
<E>
1. Remove the ten screws <E> and four screws <F>.
Screw <E> : XTB26+10GFZ
<O>
Screw <F> : DXHM0009XB
Top Cabinet
2. Disconnect the connector CN42 and CN50.
3. Remove the two screws <G>, and remove the Top Cabinet.
Screw <G> : DXHM0009XB
4. Release the two ANT Cable.
39
<E>
<F>
<E>
<F>
<E>
<E>
<F>
<F>
<G>
CN42
CN50
<E>
<E>
<G>