Hitachi CS 33EDP Service Manual page 13

Engine

Hide thumbs Also See for CS 33EDP:

(2) Reassembly

Reassembly can be conducted by reversing the disassembly procedure. However, special attention

should be given to the following items.

• Mount the Spiral Spring (NS) [192] by

matching the end hook of the spring

to the groove of the Fan Case (NS)

[187].

• Apply about 1 g of Shell Albania RL3

to the entire Spiral Spring (NS) [192].

• Apply about 0.5 g of Shell Albania

RL3 to the sliding portions of the

Reel (NS) [191] and Fan Case (NS)

[187].

• Tie the end of the Starter Rope (NS) [186] on the Reel (NS) [191] side by using a single knot, and tie

the end of the rope on the Starter Knob [185] side by using a slide knot.

• How to tie the Starter Rope (NS) [186] (Reel side)

• Mount the Reel (NS) [191] and Spiral Spring (NS) [192] so that the pawl of the reel interlocks with the

hook at the end of the spring. Turn the Reel (NS) [191] clockwise and confirm that the Reel (NS) [191]

is rewound by spring force.

• Mounting the Starter Rope (NS) [186] and Reel (NS) [191]

Hook

• Mounting the Spiral Spring (NS) [192]

Apply about 1 gram of Shell

Albania RL3 to the entire

Spiral Spring (NS) [192].

Spiral Spring (NS) [192]

-12-

• How to tie the Starter Rope (NS) [186] (Starter handle side)

Reel (NS) [191]

Matching

Apply about 0.5 gram of

Shell Albania RL3 here.

Pawl

Cs 33ed