Siemens KG N Series Instructions For Use Manual page 16

en
Note
Various external factors in home network
and the Internet can cause transmission
problems and pictures to be discarded.
These have no effect on the appliance's
basic functions.
Deactivating the cameras:
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button
again until the lock is deactivated.
2. Press °C button repeatedly until the
displays CA and on are shown.
3. Press- button to deactivate the
cameras.
The display shows oF, the cameras
are deactivated.
Resetting Home Connect settings
If the connection process does not work
or you would like to log the refrigerator
on to a different home network (WLAN),
you can reset the Home Connect
settings:
1. Press the super button and the lock
button simultaneously to open the
Home Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press the lock button
again until the lock is deactivated.
2. Press the °C button repeatedly until
the displays rE and oF are shown.
16
3. Press the + button.
The display shows a short
■
animation and then again oF.
The Home Connect settings have
been reset.
If the display shows Er, start the
■
reset again or call customer
service.
Customer Service access
If you contact Customer Service, they
can access your appliance and view its
status after you have given your consent.
You need to have your appliance
connected to your home network for this.
Further information about Customer
Service access and its availability in your
country is available under www.home-
connect.com in the Help & Support area.
1. Contact Customer Service.
2. Confirm the start of Customer Service
access in the app.
During Customer Service access the
symbol Ù appears on the control
panel.
3. As soon as Customer Service has
obtained the necessary data, they end
access.
Note
You can interrupt remote diagnosis
early by switching off Customer
Service access in the Home Connect
app.
Information on data protection
When your Home Connect refrigerator is
connected for the first time to a WLAN
network that is connected to the Internet,
your appliance transmits the following
categories of data to the Home Connect
server (initial registration):