Table of Contents
Advertisement
en
Problem
In the appliance a layer of ice
is forming.
The lid can only be closed.
Increased formation of frost on
the upper edge of the
appliance.
After-sales Service
You can find your local After-sales Service centre in the
phone book or the After-sales Service directory. Please
quote the product number (E-Nr.) and production
number (FD-Nr.) of your appliance.
You will find this information on the rating plate.
Please help us to avoid unnecessary journeys by
quoting the appliance and production number. By
doing so, you will save any associated additional
charges.
Booking a repair call-out and advice on
faults
The After-sales Service contact details for all countries
are listed in the attached After-sales Service directory.
GB
0344 892 8999
IE
01450 2655
US
866 447 4363
14
Possible cause
The ventilation openings are covered. Remove any obstructions.
The lid was not closed completely.
The door seal is dirty.
Food prevent the lid from closing
correctly.
The drain plugs are not in the correct
position.
The transport locks were not
removed.
The lid is being opened frequently.
Calls charged at local or
mobile rate.
0.03 € per minute at peak.
Off peak 0.0088 € per
minute.
toll-free
Remedy
Close the lid completely.
Clean the door seal. See section headed
Cleaning the appliance.
Remove any obstructions.
Insert the drain plugs correctly on the floor
of the appliance and on the front of the
appliance.
Remove all transport locks, (see section
headed Installing the appliance).
Do not open the lid unnecessarily.
Advertisement
Table of Contents
