Ground / Lift Switch - Phonic DB2 User Manual

CONTROL DESCRIPTION
CONTROL DESCRIPTION
4 BATTERY ON/OFF switch
Powered by 9V battery or phantom
power, DB2 leaves the decision to the
user. Set it at ON if you want to use the
battery; set it at OFF if you wish to use
phantom power.

5 GROUND / LIFT Switch

If you set the switch at LIFT, DB2
will automatically break the ground
connection between input and output,
which would eliminate the ground
loops or humming. When setting at
GND, the ground connection between
input and output will be again con-
nected.
Page 6
6 OUTPUT
This output accepts balanced XLR female
connector, which can be connected to the
mic input of your mixer.
DB2 USER'S MANUAL PHONIC CORPORATION