Advertisement
2
Right
Base
Wire
Footrest Wire
with Soothing Unit
• Position the footrest wire with soothing unit upright.
• Hook the footrest wire with soothing unit onto the ends
of the left and right base wires.
3
Red
Mark
• Position the seat back wire above the ends of the left and
right base wires as shown. Make sure the seat back
wire bends backward.
• Fit one end of the seat back wire onto the left base wire,
until the red mark on the left base wire is covered by the
seat back wire.
Assembly
Left
Base
Wire
Seat Back Wire
Left Base Wire
4
Right Base Wire
Red Mark
• Turn the Deluxe Soothing Bouncer Seat frame on its side
with the unconnected seat back and right base wires up,
as shown.
• Push down on the unconnected seat back wire and fit it
onto the right base wire, until the red mark on the right
base wire is covered by the seat back wire.
• Turn the Deluxe Soothing Bouncer Seat frame upright.
Make sure the seat back wire is securely attached to
the left and right base wires.
5
Pad
Toy Bar
Socket
• Position the pad so that the cut-out is toward the
soothing unit.
• Locate the large upper pocket on the back of the pad.
• Slide the pad pocket over the seat back wire. Do not fit
the pad over the toy bar sockets.
Helpful Hint: Before assembling the lower portion of the
pad to the footrest wire with soothing unit, you may want
to install the battery in the soothing unit. Please see the
next section (page 5, Battery Installation) for instructions.
3
Seat Back Wire
®
®
Fisher-Price
Toy Bar
Socket
Soothing
Unit
Cut-out
ON
OFF
Advertisement
