Specifications; Attachments/Accessories; Operation; Think Safety First - Toro GreensPro 1240 Operator's Manual

Greens roller
Hide thumbs Also See for GreensPro 1240:
Table of Contents

Advertisement

Specifications

Weight
313 kg (691 lb)
Length
136 cm (53.5 inches)
Width
122 cm (48.0 inches)
Height
107 cm (42.2 inches)
Maximum speed
12.8 km/h (8 mph) @ 3600 rpm

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro genuine
parts. When it comes to reliability, Toro delivers replacement
parts designed to the exact engineering specification of our
equipment. For peace of mind, insist on Toro genuine parts.

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Think Safety First

Please carefully read all of the safety instructions and decals
in the safety section. Knowing this information could help
you or bystanders avoid injury.
DANGER
If you operate the machine before reading and
understanding this Operator's Manual , you or a
bystander could be injured.
Do not operate the machine until you have
completely read this manual.

Preparing to Use the Machine

1. Clear any debris from above and underneath the
machine.
2. Ensure that any scheduled maintenance has been
completed.
3. Ensure that all guards and covers are in place and
firmly attached.
4. Check the engine oil level.
5. Ensure that there is gasoline in the fuel tank.
6. Ensure that the parking brake is set.
7. Lift the transport wheels clear of the ground and
ensure that they are locked in place.

Checking the Engine-Oil Level

Check the engine-oil level before each use or daily; refer to
Checking the Engine-Oil Level (page 27)
(page
23).
Checking the Hydraulic-Fluid
Level
Check the hydraulic-fluid level before each use or daily;
refer to
Checking the Hydraulic-Fluid Level (page 32)
Maintenance (page
23).

Checking the Tire Pressure

Make sure that the transport tires are inflated to 69 kPa (10
psi).
17
in
Maintenance
in

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

44912

Table of Contents