Other Main Functions; Setting The Clock; Changing General Settings (Psm) - JVC KW-XC777 Instructions Manual

OTHER MAIN FUNCTIONS

Setting the clock

After installation, set the built-in clock correctly.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display. (See
page 23.)
2
If "CLOCK HOUR" does not appear,
press ¢
until it appears.
3
Adjust the hour.
4
Press ¢
MIN (minute)" appears on the display.
5
Adjust the minute.
6
Finish the setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.
22
or 4
repeatedly
or 4
until "CLOCK

Changing general settings (PSM)

You can change the following settings for this unit
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 23.)
2
Select a PSM item you want to
adjust. (See page 23.)
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the setting.