Preparation - Vixen PORTA II Instruction Manual

Altazimuth mount telescopes
Hide thumbs Also See for PORTA II:
Table of Contents

Advertisement

Preparation

Setting Up the Tripod / Attaching the Slow Motion Handles
Stand the tripod on an
① 
even and sold ground.
Adjust the height of the
tripod as the occasion
demands.
To change the height, loosen
the leg extension clamp of
each tripod leg. Be sure to
tighten all the leg extension
clamps securely after adjusting
the height of the tripod.
③ Take off the tray lock
knob at the center of
the tripod leg spreader
and reveal the screw
bolt.
Attach the slow motion control handles onto each
of the worm shafts for altitude adjustment and
azimuth adjustment on the mount. Orient the
metal sleeve so that the dent on the sleeve goes
to the flat portion of the worm shaft. Slide the
metal sleeve on the slow motion handle over the
worm shaft.
There are two altitude worm shafts, one on either side of the
altitude slow motion unit, and there are another two azimuth
worm shafts on the azimuth slow motion unit. Use whichever
one you find more convenient.
The two slow motion handles are the same and you can use
whichever for altitude slow motion control or for azimuth slow
motion control.
Preparation for Mounting the Optical Tube
① Turn the dovetail moun-
ting block by hand so
that the dovetail lock
knob is on top.
Assembling the Telescope
Leg Extension
Leg Extension
Clamp
Clamp
Tray Lock Knob
Tray Lock Knob
Dovetail Mounting Block
Dovetail Mounting Block
Dovetail Lock knob
Dovetail Lock knob
6
② P u l l t h e t r i p o d l e g s
apart until the tripod
leg spreader has been
fully extended to let the
t r i p o d s t a n d b y i t s e l f
④ Place the accessory
tray over the tripod leg
spreader and position it
so the screw bolt on the
tripod leg spreader fits
the matching hole at the
center of the accessory
t r a y .
T h e n , f i x t h e
a c c e s s o r y t r a y w i t h
the tray lock knob.
Flat portion of the
Flat portion of the
Dent
Dent
Worm Shaft
Worm Shaft
Sleeve on the Slow
Sleeve on the Slow
Motion Handle
Motion Handle
Azimuth Handle
Azimuth Handle
② Loosen both the dovetail
lock knob and safety
screw until the tips of
these screws no longer
extend into the inner
part of the adapter block.
Tripod Leg Spreader
Tripod Leg Spreader
Tray Lock Knob
Tray Lock Knob
Accessory Tray
Accessory Tray
A lt i tu d e H a n d l e
A lt i tu d e H a n d l e
A l ti t u d e
A l ti t u d e
w or m s h a f t s
w or m s h a f t s
Azimuth Handle
Azimuth Handle
Azimuth worm shafts
Azimuth worm shafts
Dovetail Lock knob
Dovetail Lock knob
S a f e t y S c re w
S a f e t y S c re w

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mini porta

Table of Contents