2-4. PICTURE TUBE REMOVAL
"CAU
AVOID AN ELECTRIC SHOCK FROM CHARGED HIGH VOLTAGE OF PICTURE TUBE.
T O
REMOVAL OF ANODE-CAP
l
Short circuit the anode of the picture tube and the anode cap to the metal chassis, CR
painted on the CRT, after removing the anode.
REMOVING PROCEDURES
l
@Turn up one side of the rubber cap in
the direction indicated by the
HOW TO HANDLE AN ANODE-CAP
l
sharp
shaped
material!
Don't press the rubber hardly not to hurt
inside
of
anode-caps!
A material fitting called as shatter-hook
terminal is built in the rubber.
Don't turn the foot of rubber over hardly!
The shatter-hook terminal will stick out or
hurt the rubber.
\
@Using a thumb pull up the rubber cap
arrow @.
firmly in the direction indicated by the
arrow @.
- 2 2 -
T chield or carbon
'
Anode button
@When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up
the rubber cap and pulling up it in
the direction of the arrow 0.