Page 2
Install Caster Wheels Remove Plug Before assembly, make Carefully remove the sure to empty the inside tower plug (#17) of the unit including all located on the top of shelves and metal keg the unit by opening the floor (# 11). Carefully cabinet, and with your lay the unit on its back.
Page 3
Connect Regulator to Cylinder Connect Tube to Regulator Attach the CO 2 regulator (#6) to Make sure the shut off CO 2 cylinder (#8) by valve at the bottom of the screwing the regulator nut onto regulator is closed (9 the cylinder valve and tightening o’clock position).
Page 4
Please refer to the owner’s manual for a full discourse on installation, usage and maintenance. If you have any questions about the installation of this appliance, feel free to contact EdgeStar service at 866.319.5473 or consult a qualified installer. Neither the manufacturer nor its distributors shall be liable for any incidental, consequential, indirect, special, or punitive damages of any nature, including without limitation, lost revenues or profits, or any other damage whether based in contract, tort, or otherwise.
Need help?
Do you have a question about the KC3000 and is the answer not in the manual?
Questions and answers