Specifications - Universal Laser Systems X-600 Safety, Installation, Operation, And Basic Maintenance Manual

Model Number
Resolution
Computer Needed
Work Area
Table Size
Maximum Part Size
Laser Source(s)
(X2-600 only)
Lenses Available
Interfaces
Memory Buffer
Dimensions
Weight
Safety
Available Options
Facility Requirements
Power (X-600)
(X2-600)
Exhaust
Cooling
Specifications are subject to change without notice.

Specifications

X-600 or X2-600
1000 x 1000 DPI, 500 x 500 DPI, 333 x 333 DPI, 250 x 250 DPI
200 x 200 DPI, Draft
Windows 95 or 98, PC compatible
32" x 18" (812.8 mm x 457.2 mm)
37" x 23" (939.8 mm x 584.2 mm)
37" (939.8 mm) wide x 23" (584.2 mm) deep x 9" (228.6mm) tall
15, 20, 25, 30, 35, 40, 45, 50 Quick Change Laser Cartridge
15, 20, 25, 30, 35, 40, 45, 50 Quick Change Laser Cartridge (Laser #2)
Focal Length / Spot Size / (Standard or Optional)
1.5" (38.1mm) / 0.003 inches (.08 mm) / Optional
2.0" (50.8mm) / 0.005 inches (.13mm) / Standard
2.5" (63.5mm) / 0.007 inches (.18 mm) / Optional
4.0" (101.6mm) / 0.013 inches (.33 mm) / Optional
Centronics parallel, RS232C Serial
Multiple and Single file storage modes, automatic data compression
38" high x 44" wide x 38" deep (965 x 1117 x 965mm)
approximately 320 lbs. (145 kg)
CO2 interlocked safety enclosure = Class I
Red Pointer Diode = Class IIIa
Rotary Fixture, Air Assist, Honeycomb Cutting Table
Single Phase 110/220V AC, 15/8 Amp, 50/60 Hz
Single Phase 220V AC, 8 Amp, 50/60 Hz
Outside exhausting required, two 4" connections,
500 CFM minimum (250 at each connection) at 6 inches static pressure
3
(425m /hr at 1.5kPa)
Air-cooled (ambient temperature 50ºF (10ºC) to 95ºF (35º C))