Download Print this page

Endless Summer WK-INS-100 E User Manual

Outdoor patio heater wheel assembly kit
Hide thumbs

Advertisement

Quick Links

Component
1. Wheel Assembly . . . . . . . . . . . . . . . . . . . . . 56-01-378
Step
Attach wheel assembly during heater assembly
1
Note: Attach wheel assembly to base prior to attaching the weight plate.
A. Attach wheel assembly to base using 2 sets of wheel bolts (A), wheel washers (C) and wheel nuts (B).
B. Continue heater assembly in Owner's Manual.
Attach wheel assembly after heater is assembled
A. Lay heater on its side. Be careful not to damage your dome. Support the post on a box or other sturdy item.
B. Remove weight plate, if needed.
C. Attach wheel assembly to base using 2 sets of wheel bolts (A), wheel washers (C) and wheel nuts (B).
D. Reassemble weight plate, if removed.
E. Stand heater upright.
Manufactured in China for:
Blue Rhino Global Sourcing, LLC
104 Cambridge Plaza Drive, Winston-Salem, NC 27104 USA
1.800.762.1142, www.bluerhino.com
© 2005 Blue Rhino Global Sourcing, LLC. All Rights Reserved
®
Endless Summer
is a Registered Trademark of Blue Rhino Global Sourcing, LLC. All Rights Reserved
®
Hardware
A
Wheel Bolt
5/16" - 18 x 15 Stainless Steel Hex Head Bolt
B
Wheel Nut
5/16" - 18 Stainless Steel Hex Nut
C
Wheel Washer
8 mm Stainless Steel Washer
Outdoor Patio Heater
Wheel Assembly Kit
A
C
B
2 pcs
2 pcs
2 pcs
WK-INS-100 E

Advertisement

loading

  Related Manuals for Endless Summer ENDLESS SUMMER WK-INS-100 E

This manual is also suitable for:

56-01-378