Advertisement
STEP 3
Remove lower nut from VESA plate (B) using the wrench (H) , and loosen the upper two nuts until 3mm
of screw thread is exposed for each one.
H
STEP 4
Mount VESA extensions (C) to VESA plate (B) in one of the patterns shown using carriage bolts (G) and
nuts (F) , and tighten with the wrench.
(NOTE: For VESA patterns 200x200mm and smaller, skip this step.)
4
STEP 5
OPTION A: Flat Back Monitor
Mount VESA plate (B) to TV using bolts (M-A or M-B) with washers (M-F or M-G) , making sure the two
nuts are facing towards the top of the TV.
OPTION B: Curved Back Monitor
Mount VESA plate (B) to TV using bolts (M-C, M-D, M-E) with washers (M-G) and spacers (M-H, M-I) in
STEP 6
Hang TV with VESA plate onto head of arm (A).
5
Advertisement
