Advertisement
PACKAGE CONTENTS
B (x1)
A (x1)
VESA Plate
Arm
F (x4)
G (x4)
Nut
Carriage Bolt
M-A (x4)
M-B (x4)
M5x14
M6x14
M-F (x4)
M-G (x8)
D5 Washer
D8 Washer
W-A (x3)
W-B (x3)
Bolt
Anchor
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
2
D (x1)
C (x1)
E (x1)
Screw Cover
VESA
Screw Cover
Extension
H (x1)
I (x1)
J (x1)
Wrench
4mm Allen Wrench
6mm Allen
Wrench
M-C (x4)
M-D (x4)
M-E (x4)
M6x30
M8x30
M8x50
M-H (x8)
M-I (x8)
Small Spacer
Large Spacer
W-C (x3)
Washer
Screwdriver
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
50.6 lbs
(22.95kg)
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Using the wall plate on the arm (A), mark
recommended. Drill 2.2" (55mm) deep holes
using a 3/16" (4.5mm) drill bit, and mount the
arm to the wall using screws (W-A) and washers
(W-C) .
STEP 2
Attach screw covers (D, E) to wall plate.
Drill
OPTION B: Concrete Wall
Using the wall plate on the arm (A), mark drilling
locations. Drill 2.4" (60mm) deep holes using a
3/8" (10mm) drill bit, press anchors (W-B) into
holes, and mount the arm to the wall using screws
(W-A) and washers (W-C) . NOTE: Anchors are
made for use with concrete or brick, and will not
work with drywall.
D
E
3
Advertisement
