Contents Important Safety Instructions Safety ............................................3 Warning ............................................4 What’s in the Box Identifying the Parts Main Unit ..........................................6 Wireless Subwoofer ......................................6 Remote Control ........................................7 Preparations Prepare the Remote Control .....................................7 Replace the Remote Control Battery ................................7 Placement and Mounting ....................................8 Wall Mounting (if using option-B) ..................................8 Connections Dolby Atmos®...
Important Safety Instructions third prong is provided for your safety. If the CAUTION provided plug does not fit into your outlet, RISK OF ELECTRIC SHOCK consult an electrician for replacement of the DO NOT OPEN obsolete outlet. 10 Protect the power cord from being walked on CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Warning Correct Disposal of this product. This marking indicates that this product • The battery (batteries or battery pack) shall not should not be disposed with other be exposed to excessive heat such as sunshine, household wastes throughout the EU. fire or the like.
What’s in the Box Main Unit Remote Control Wireless Subwoofer Adapter 3.5mm to 3.5mm (for Main Unit) Audio Cable AC Power Cord HDMI Cable Wall Bracket Wall mounting Screw • Design and specifications are subject to change without notice.
Identifying the Parts Main Unit 1 Display Window Show the current status. 2 Remote Control Sensor Receive signal from the remote control. 3 Screws Remove the screws then install the wall mounting screws into the back of the unit. (ON/OFF) button Switch the unit between ON and Standby mode.
Remote Control Switch the unit between ON and STANDBY mode. 2 VOL+/VOL- Increase/decrease the volume level. 3 SOURCE Select the play function. 4 EQ Select a preset sound effect. 5 DIMMER Adjust display brightness. 6 MUTE Mute or resume the sound. Skip to previous/next track in Bluetooth/USB mode.
Placement and Mounting Placement A If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centered with the TV screen. B If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen. Wall Mounting (if using option-B) Note: Installation must be carried out by qualified...
Connections Dolby Atmos® Dolby Atmos gives you amazing experience you have never before by overhead sound, and all the richness, clarity, and power of Dolby sound. For using Dolby Atmos® Dolby Atmos® is available only in HDMI mode. For the details of the connection, please refer to “HDMI Connection”.
Method 2: Standard HDMI If your TV is not HDMI ARC-compliant, connect your soundbar to the TV through a standard HDMI connection. 1. Use an HDMI cable (included) to connect the soundbar's HDMI OUT socket to the TV’s HDMI IN socket.
Soundbar Unwind the mains adapter and mains cable to their full length. Connect the mains adapter to the DC IN 23V socket of the soundbar, then connect the mains cable to the mains adapter and into a mains socket. Subwoofer Connect the mains cable to the AC~ Socket of the Subwoofer and then into a mains socket.
Basic Operation Standby/ON When you first connect the main unit to the mains socket, the main unit will be in Standby mode. • Press the button on the unit or on the remote control to switch the unit ON. • Press the button again to switch the unit back to STANDBY mode.
/ PAIR button on the remote control to be searchable. The display will show “PAIR” and you will hear "Pairing" from the unit. 3 Select “A&S 800” in the pairing list. After successful pairing, you will hear "Paired" from the unit, and the display panel shows “BT”.
To disconnect the Bluetooth function, you can : Switch to another function on the unit. Disable the function from your Bluetooth device.The Bluetooth device will be disconnected from the unit after the “Disconnected” voice prompt. / PAIR button on the remote control. Press and hold the Tips: •...
Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. No power Ensure that the AC cord of the apparatus is properly connected . •...
Specifications Model Name A&S 800 Soundbar Adapter Power Input AC100-240V~ 50/60Hz, 4A Adapter Power Output Main Unit Power Supply Input DC 23V 0.5A Dimension (WxHxD) 1198 x 73 x 110 mm (47.2 x 2.9 x 4.3 inch) Net weight 8.8 lbs (4 kg)