Contents Important Safety Instructions ..................4 Safety ....................................4 Warning ....................................5 What’s in the Box ........................ 6 Specifications ........................6 Identifying the Parts ......................7 Main Unit .................................... 7 Remote Control ................................8 Preparations ........................8 Prepare the Remote Control ............................8 Replace the Remote Control Battery ........................
Important Safety Instructions the third prong is provided for your safety. CAUTION If the provided plug does not fit into your RISK OF ELECTRIC SHOCK outlet, consult an electrician for replacement DO NOT OPEN of the obsolete outlet. 10 Protect the power cord from being walked on CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Caution: DO NOT INGEST BATTERY,CHEMICAL BURN HAZARD U s e o f c o n t r o l s o r a d j u s t m e n t s o r The remote control supplied with this performance of procedures other than those product contains a coin/button cell battery.
What’s in the Box Main Unit Remote Control Instruction Manual 3.5mm to 3.5mm audio Cable Optical Cable Wall Bracket • Design and specifications are subject to change without notice. Specifications General Power requirements .........................AC220-240V ~ 50/60Hz Power consumption ...............................30 W Output power RMS ............................15Wx2+30W Total harmonic distortion .........................1% (1kHz, 1W) Audio input sensitivity .............................
Identifying the Parts Main Unit 1 Remote Control Sensor Receive signal from the remote control. 2 Display Window Show the current status. 3 Wall bracket screws button Press this button to switch the unit ON or press and hold to switch to Standby mode. Select the play function.
Remote Control Switch the unit between ON and STANDBY mode. 2 SOURCE buttons Select the play function. 3 MUTE Mute or resume the sound. 4 VOL+/VOL- Increase/decrease the volume level. • In Bluetooth mode, skip to previous/next audio file. • / PAIR In Bluetooth mode, start or pause playback.
Do not use any batteries other than those specified. Do not heat or disassemble batteries. Never throw them in fire or water. Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short circuit, leak or explode. Never recharge a battery unless it is confirmed to be a rechargeable type.
Connections Use the HDMI (ARC) Socket ARC (Audio Return Channel) The ARC (Audio Return Channel) function allows you to send audio from your ARC- compliant TV to your sound bar through a single HDMI connection. To enjoy the ARC function, please ensure your TV is both HDMI-CEC and ARC compliant and set up accordingly.
Use the COAXIAL Socket • You also can use the COAXIAL cable (not included) to connect the TV's COAXIAL OUT socket and COAXIAL socket on the unit. COAXIAL Tip: While in OPTICAL/COAXIAL/HDMI ARC mode, if there’s no sound output from the unit, you •...
Use the AUX Socket Use a 3.5mm to 3.5mm audio cable (included) to connect an external audio device headphone socket to the AUX (3.5mm) socket on the unit. Phone Media player Power Connection Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
Adjust the Volume Press the VOL +/– buttons on the unit or on the remote control to adjust the volume. • • If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE button again or press the VOL +/- buttons to resume normal listening.
To disconnect the Bluetooth function, you can : Switch to another function on the unit. Disable the function from your Bluetooth device.The Bluetooth device will be disconnected from the soundbar after the “Disconnected” voice prompt. Press and hole the /PAIR button on the remote control. Tips: 1 Enter 0000 for the password if necessary.
Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. No power Ensure that the AC cord of the soundbar is connected properly. Ensure that there is power at the AC outlet.