Symbology Submenu - Printronix Auto ID T8204 User Manual

Comm Error
This menu allows the 'Validator not communicating' error to be clearable by
the user or not clearable by the user.
Not Clearable
Clearable
Factory Default
Comm Timeout
This option is used to control the threshold of time the validator does not
respond with verification status before declaring an error.
Minimum
Maximum
Factory Default
IMPORTANT

Symbology Submenu

Several ODV-2D options which define which barcodes will be graded and which will be ignored. This can
be chosen based on symbology or orientation. Note there are also PTX-SETUP commands that can be
used to configure these options as described in Section "PTX_SETUP Control".
Orientation
This menu selects the barcode orientations that will be processed and
graded and which will be ignored.
All
Picket
Ladder
Factory Default
22
ODV-2D > Control > Comm Error
The user must resolve the error and recycle the printer
power to print.
The user will be able to clear the fault and print jobs.
Barcodes in these jobs will not be validated.
Clearable
ODV-2D > Control > Skip Labels
10 seconds
180 seconds
25 seconds
For labels with complex and significant data en-
coded in 2D barcodes, this menu may need to be
increased.
ODV-2D > Symbology > Orientation
All orientations will be graded.
Picket barcodes and 2-D barcodes in 0 and 180 de-
gree rotations.
Ladder barcodes and 2-D barcodes in 90 and 270
degree rotations.
All