Table of Contents
Advertisement
•
ISO - In this mode, all grading parameters are based on ISO standards. Only the Overall Grade
menu is user adjustable to generate a fault. When this mode is selected all other menus in this
section are hidden and reset. The grading results are then based on the ISO specifications.
•
Non-ISO - This mode allows the user to set custom failure thresholds on individual barcode
quality parameters. Changing individual quality parameters may lead to non-ISO standard
grading. It is recommended that only users that understand both the ISO standards and the end
user barcode quality requirements change any setting that affects the barcode quality parameters.
All quality parameter menus are visible and user adjustable in this mode
Parameter Applicability
Barcode verifiers use parameters dictated by industry standards for grading and reporting barcodes. The
table below shows a summary of the industry standard parameters used for barcode grading. While the
ODV-2D is limited to validation, it will implement the same ISO parameters for grading as shown in Table
3.
Parameter
Rmin
Defects
Decodability
NOTE: Stacked Barcodes include PDF417. Matrix barcodes include DataMatrix, QR, and Aztec.
Table 3 Configurable Analysis Parameters
2D
1D
Stacked
Matrix
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
13
Hide quick links:
Advertisement
Chapters
Table of Contents
