Advertisement
Tapware is to b e ins t alle d by a L icense d
Plumb er in accordance wit h A S/NZ S 350 0 :20 0 3
Re commen de d wor k ing water p re ssure 3 0 0 -50 0 k pa .
Ma ximum water temp er ature is 65 deg.c .
1/2" BSP
Lugged Elbow
Water Feed
Apply Sealant
Set
Screws
Use 10mm Allen
Noggin
Key To Fit
Inlet
Fitting
Dress ring
15-20mm
FINISHED WALL
Toggle
Anchor
Wall Fixing
To Suit
x2 Set
Toggle
Screws
Wall
Dress ring
Anchor
Check Valve
Shower
Shower Arm
Outlet Post
Diverter
Set
Screw
Slide Rail
Hand Shower
Check Valve
Fixing
Body
Shower
Hose
Extension
Hose
INSTALLATION GUIDE
Voda Twin Shower Rail
Product code:
V TR S
Shower Head
INS TALL ATION G UIDELINE S
- The Rail is supplied par t assembled to suit a Top Water Inlet
installation.
- FOR BOT TOM WATER INLET INSTALL ATION SEE PAGE 3.
- Remove Inlet Fitting and Wall Fixing by loosening the Set
Screws.
- Accurately mark out and drill for the Wall Fixing 90 0mm from
centre of Water Feed (see Spring Toggle Wall Anchor guide).
- Ensure the wall penetration is sealed prior to connecting any
fittings.
- Apply thread tape or appropriate sealant to Water Feed Thread
and attach Inlet Fitting using 10mm Allen key.
- Using the provided Spring Toggle Anchor attach the Wall
Fixing.
- Fit the Rail Shower as assembled onto the Wall Fixing and Inlet
Fixing, secure by tightening the Set Screws.
- Align and fit the Shower Arm over the Outlet Post.
- Secure Shower Arm by tightening Set Screws (tighten well).
- Attach Shower Head, tighten using spanner.
- Test function and water flow on both Shower Head and Hand
Shower.
- Check for water leaks.
250
345
60
320
22
1360
900
115
sussextaps.com.au
1
Advertisement
Table of Contents
Related Manuals for Sussex Voda VTRS
Summary of Contents for Sussex Voda VTRS
- Page 1 INSTALLATION GUIDE Tapware is to b e ins t alle d by a L icense d Plumb er in accordance wit h A S/NZ S 350 0 :20 0 3 Voda Twin Shower Rail Product code: Re commen de d wor k ing water p re ssure 3 0 0 -50 0 k pa . V TR S Ma ximum water temp er ature is 65 deg.c .
- Page 2 • Never use harsh detergents or abrasive cleaners, as these will scratch the Should any warranty claim be made and service attended to by a Sussex Taps surface. authorized Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than •...
- Page 3 INSTALLATION GUIDE Tapware is to b e ins t alle d by a L icense d Plumb er in accordance wit h A S/NZ S 350 0 :20 0 3 Voda Twin Shower Rail Re commen de d wor k ing water p re ssure 3 0 0 -50 0 k pa . Product code: Ma ximum water temp er ature is 65 deg.c .
- Page 4 - Remove Diverter and Fixing Body by loosening Set - Swap the Diverter Body and Fixing Body positions. Screw. - Diverter body will now be located at the bottom. - Fixing body will now be located at the top. Diverter Body Diverter Body Coverplate...
Need help?
Do you have a question about the Voda VTRS and is the answer not in the manual?
Questions and answers