INSTALLATION INSTRUCTIONS
Unpacking your washer
WARNINGS:
• Packing materials can be dangerous to children. Keep all packing materials (plastic
bags, polystyrene, and so on) well out of the reach of children.
• Don't operate your washer on the foam base cushion. Doing so results in serious
vibration, which could cause equipment damage or result in physical injury.
• Remove the packing box, then lift your washer up and away from the foam
base cushion. Open the lid of your washer to take out all accessories including
the protective foam.
CAUTION:
Your washer is heavy. You may need help to unpack and move it.
Foam base cushion
Choosing a location
WARNINGS:
• Don't install your washer in areas where water may freeze because your washer
always retains some water in its water valve, pump, and hose areas. Frozen water
can damage the belts, pump, hoses, and other components.
• Never install on a platform or weakly supported structure.
• For best performance, you must install your washer on a solid, level floor.
• Wooden floors may need to be reinforced to minimize vibration or
unbalanced load situations.
• Carpeting and soft tile surfaces can contribute to excessive vibration, which
can cause your washer to move slightly during the spin cycle.
www.insigniaproducts.com
NS-TWM45W1
Protective
foam
15