Table of Contents
Advertisement
Preparation (continued)
Adjustment screw
Note
z If the target amount is significantly exceeded, the projected image may no longer be in
focus on the screen.
Mounting screws
14-ENGLISH
4) Turn the adjustment screw at
the bottom of the lens fixed
attachment to move the lower
edge of the projected image to
lower edge of the screen.
Attention
z Do not perform the shift operation while
the lens fixed attachment is fixed in place.
5) Tighten the mounting screws
in four places on the lens fixing
brackets to fix the lens fixing
brackets in place.
Note
z After lifting up the lens, finely adjustment
the position within the ranges of 32 dots
horizontally and 16 dots vertically.
Hide quick links:
Advertisement
Table of Contents
