Preparation (continued)
z When using one of PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 /
PT-RW730 / PT-RZ660 / PT-RW620
When aligning the orientation of the projected image and moving the lens to the home
position, perform the operation with the following procedure.
LENS
SHIFT
VERTICAL POSITION
HORIZONTAL POSITION
ADJUST
HOME POSITION
DEFAULT
LENS
HOME POSITION
CHANGE
EXECUTE
ENTER
Note
z If [HOME POSITION] is incorrectly set to other than [ET-DLE020], the lens will not move
to the correct home position.
12-ENGLISH
ET-DLE020
CANCEL
MENU
1) Turn on the projector to start
the projection.
z The top, bottom, left, and right of the
projected image will be inverted until
you perform step 4).
2) Press the <SHIFT> button on
the remote control.
z The shift adjustment screen appears.
3) Press the <DEFAULT> button
on the remote control while
the shift adjustment screen is
displayed.
z The [HOME POSITION] screen ap-
pears.
4) Use the ◄► buttons to select
[ET-DLE020].
z Each press of the ◄► buttons switch-
es the item to [NORMAL],
[ET-DLE030] or [ET-DLE020].
5) Press the <ENTER> button.
z [PROGRESS] is displayed on the
[HOME POSITION] screen and the
lens moves to the home position for
the ET-DLE020.