Samsung SDP-860 Basic Operations page 2

Press button to toggle between doc cam (INT)and computer (EXT) modes.
INT/EXT (Internal/External)
INT/EXT
Brightness / Zoom / Focus Wheel
Adjust the Brightness
panel or remote. The LED lamp can be turned on or off by pressing the
If glare occurs when viewing glossy materials, either turn off the lamp or use the included
sheet. Adjust the brightness as needed.
Use the
object in any position.
You can use the computer monitor as a live preview display when connected via the USB while
using the Freeze feature on the SDP-860. You can also adjust the default to Freeze both the live
Tip:
image and the computer image by pressing the Menu button.
The LAMP
Samsung 860 by factory default has
Tracking
presentation station, it will usually color balance the subject very quickly without the teacher
needing to make any adjustments.
Tip:
If any color adjustments need to me made when displaying a new item, the simplest solution is to simply
turn the lamp off and then back on and this will cause the doc cam to white balance itself.
Not So Important
The MF (Manual Focus) /AWB (Auto White Balance) button
teachers as they won't need to manually focus as Auto Focus takes care of that and Auto White
Balance is also automatically set up for Auto Tracking from the factory.
to the desired setting by using the
Press the
or enlarge the image
zoom range - Blue Gauge = optical zoom, Red Gauge = digital zoom.
The Optical zoom
continue with Digital zoom
zooming has stopped in all modes.
button to "hold" any image on screen while you change your subject or to Freeze an
FREEZE
is important because it is the quickest way to brighten your document or object. The
setting. This means that when you place a document, book or object on the white
UP/DOWN Buttons
LEFT/RIGHT Buttons found on the control panel to reduce
to the desired size. The on screen display will indicate the
will automatically stop at 6x. Press the zoom button again to
(up to 8x maximum). Auto focus will occur after
Automatic White Balance (AWB) built-in
found on the control
LAMP button.
diffuser
through an
can generally be ignored by most
Auto
6