Agilent Technologies 1200 Series User Manual page 16

1 Introduction to the Column Compartment
Table 1
be edited via the user interface.
Table 1
Item
Product number
Serial number
Batch number
Geometry [mm]
Stationary phase
Particle size
Number of injections
Maximum pressure allowed [bar]
Maximum temperature recommended [°C]
Maximum pH recommended
Column void volume [ml]
The number of injections will be updated each run to create a column lifecycle
(history). The user interface allows to edit all information.
If a column switching valve (see
N O T E
number of injections depends on the position of the column switching valve. For example, if
the left column is selected, the right column is not updated, and vice versa.
If no column switching valve is installed both sides are updated at the same time.
16
shows the information that can be stored. The information fields can
Column-Identification Module Information
Example
79916OD-552
950522
1675
100 × 2.1
ODS Hypersil
10 µm
1267
400
70
12
page 19) is installed in the module, the update of the
Comment
Date of manufacturing
See Note below.
1200 Series TCC User Manual