Changing The Frequency Step - Uniden BC9000XLT User Manual

Changing the Frequency Step

The frequency step is the minimum space between frequencies in the
Manual or Search Mode.
Your scanner is pre-programmed with a default frequency step for each of
its frequency bands. You can override the default frequency step to
search in larger or smaller increments when searching, during Auto Store,
or when stepping through frequencies with h, l , or the Rotary
Tuner.
1. Press h to stop the
search.
2. Press f.
3. Press the desired step on the
numeric keypad.
Example: Press ) .
To return to the original frequency
step, press ? twice.
5 . 0KHz
NFM
50 . 0KHz
STEP: 50.0KHz
5 0 .0KHz
NFM
5 . 0KHz
NFM
35
ch 230
48.0000MHz
ch230
ch 230
48.0000MHz
ch 230
48.0000MHz