Uniden MC 724 Owner's Manual page 8

r
REVERSING THE FRONT PANEL
.
I
121REMOVE FOUR SCREWS
,
FROM SPEAKER CABINET
i
(5)
TURN UNITOVERAND CAREFULLY
REMOVE COVER CABINET.
PULL UP FROM REAR FIRST.
(1)
LOOSEN FOUR SCREWS OF
APPEARANCE COVER (PLASTIC
COVER)
(4) DISCONNECT SPEAKER
WIRES FROM MAIN PCB
(7) TI LT FRONT PANEL.
(8) REPLACE FOUR SCREWS TO
SECURE FRONT PANEL TO
CHASSIS.
(3) REMOVE
SPEAKER CABINET
(9)
CAREFULLY REPLACE COVER CABINET ON BOTTOM OF RADIO.
INSERT UNDER FRONT PANEL FIRST AND THEN LOWER AT REAR OF RADIO.
(10) TURN RADIO OVER AND RECONNECT SPEAKER WIRE LEADS.
(11) REPOSITION SPEAKER CABINET ON TOP OF RADIO AND REPLACE FOUR
SCREWS TO SECURE THE HOUSING.
(12) RETIGHTEN FOUR APPEARANCE COVER SCREWS.
-7-