clare CS-PNC-10 Install Manual

The CS-PNC-10
trigger a panic alarm.
Features
• Water resistant housing
• Low battery indication
• Secure encrypted wireless transmissions
• Can be worn with a lanyard or wristband
Enroll
the panic by placing the panel into wireless
enrollment mode and pressing the red panic button. Alternatively, the panic can
be enrolled by scanning its bar code using the Install Assist App or by entering its
8-character serial number on the interactive service provider's web portal.
Operate
by pressing the red panic button until the LED starts flashing.
Wear
using the included lanyard or wristband. Note: To install the wristband you must first
remove the clear plastic tube used to attach the lanyard.
Use the panel installation guide to verify proper system setup.
CS-PNC-10
Panic Pendant
is a supervised portable device used to
Wristband Lanyard
I