Uniden DECT 6015 Owner's Manual page 21

Registering DECT 6005 Accessory Handsets
If you purchase an accessory handset, you need to register the handset before use. Handset(s) supplied in the box
with the base are pre-registered at the factory. When charged, pre-registered handsets display a handset ID number.
Handsets that have not been registered display:
H a n d s e t n o t
r e g i s t e r e d - p l a c e
h a n d s e t o n b a s e
To register an accessory handset:
1) Charge the handset for 15-20 hours.
2) Place the handset in the main telephone base cradle to initiate registration. HANDSET REGISTERING will
appear in the LCD.
3) Wait approximately thirty seconds, "REGISTRATION COMPLETE" will be displayed to indicate the handset has
been registered to the base and a handset ID will be automatically assigned.
If REGISTRATION FAILED appears in the LCD, please try these steps again.
Note: If an accessory handset has ever been registered to a base, you must reset the handset before you can
register it to a new base. See Resetting the Handset on page 40.
DECT6015 OM.indb 20 DECT6015 OM.indb 20
t o r e g i s t e r .
S e e y o u r O w n e r ' s
M a n u a l f o r h e l p .
20
8/8/07 4:10:30 PM 8/8/07 4:10:30 PM