Advertisement
Analogue Output Card
The Analogue Output card is available as a 2 or 4 channel card; whatever the number of channels, installation and
operation is exactly the same.
An Analogue Output card can be fitted into slots E and F of an Multitrend recorder, or slots B on a Minitrend recorder.
(Not available for the eZtrend recorder)
The card has a 12 way connector and a blanking plate, which is fitted to the right of the connector. Channels always use
three connections on the rear connector, and always start from the left.
Connections
Pulse Input Card (Not eZtrend)
The Pulse Input Card is only available as a 4 channel card.
A Pulse Input card can be fitted in slots A to F of an Multitrend recorder, or slots A or B on a Minitrend recorder. (Not
available for the eZtrend recorder)
The card has a 12 way connector and a blanking plate, which is fitted to the left of the connector. Channels always use
three connections on the rear connector, and always start from the left.
Connections
For further information on connection details and operation of any of these three cards please refer to the Recorder
User Manual.
43-TV-33-56 iss.4 GLO Aug 19 UK
(Not for eZtrend )
NC= Not Connected
Figure 8
Analogue Out
Connections
Figure 9
Pulse input
Connections
5
Advertisement
